Product appearance: The product belongs to the horizontal, sink board, waterproof type C base series. The interface is elliptical and equipped with a waterproof ring. Two pins are inserted on the PCB board, and the overall sinking on the board is 0.4mm (broken board 0.4mm). The waterproof level is IPX8. There are 24 pin pins at the tail. The current can exceed 2-3A. Voltage 5V, maximum contact resistance 50m Ω. The minimum insulation resistance is 100M Ω. Insertion force 7-25N. Working temperature -40 ° C to+85 ° C. Can withstand 10000 times of repeated plugging and unplugging. Supports front and back insertion. Application scope: digital products, security products, portable devices, computers, communication products, etc.

For the detection of circuit faults in the Type-C mother base, when the Type-C mother base experiences a short circuit fault and cannot be used, do not detect the circuit when the Type-C mother base is powered on. Due to a malfunction in the Type-C base, the circuit is currently in an overload, high temperature, and short circuit state. If it is powered on again, it will cause other circuits to malfunction, and in severe cases, it may directly burn out the socket. Therefore, when the Type-C mother seat malfunctions, the switch power should be immediately turned off so that professional instruments can be used to diagnose the fault. When using, do not reach out to the socket interface or insert metal objects into the power supply of the Type-C mother base interface to avoid dangerous accidents such as electric shock. After use, it is also important to cover the protective cover of the Type-C base, which not only prevents dust intrusion but also provides moisture resistance.